純正ワイヤレスCarPlay化|ポルシェ・アウディ(遠隔・ドングル不要)
有線CarPlayは使えるのに、ワイヤレスにならない?
ポルシェ・アウディの一部車両(特に並行輸入車や特定地域仕様)では、純正のワイヤレスCarPlay機能があるにもかかわらず、地域設定により5GHz Wi-Fiが無効化され、ケーブル接続でしか使えない状態になっています。
ドングルとの違い — なぜ純正化が選ばれるのか
| ドングル方式 | 純正化(当サービス) | |
|---|---|---|
| 機器 | USBドングルが常時必要 | 追加機器なし |
| 遅延 | あり(接続に数秒) | なし(即時接続) |
| 画面・UI | 社外アプリ経由 | 純正OEM画面そのまま |
| 安定性 | 不安定になることがある | 純正5GHz Wi-Fi、安定 |
| 見た目 | USB口に機器が出っ張る | 純正のまま |
ドングルは不要です。純正機能をそのまま有効化。
当サービスでは、車両の純正5GHz Wi-Fiをソフトウェアで有効化し、本物のワイヤレスCarPlayを実現します。USBドングルのような後付け機器は一切不要です。
- ⚡ 遅延なし — 純正5GHz Wi-Fiで即時接続
- 🔌 ドングル不要 — USBポートをふさがない
- 📱 純正OEM UI — 後付け感ゼロ
- 🚗 エンジン始動で自動接続
- ドングル不要 — 純正の画面・操作そのまま
- 追加ハードウェアなし — 見た目も純正のまま
- 遠隔施工 — ご来店不要
対応車種(PCM5 / MH2P)
ポルシェ:マカン(2019年〜)、カイエン(2018〜2021)、パナメーラ(2021)、911/992(2019〜2021)。 アウディ/VW:A6・A7・A8・Q7・Q8・Q3・e-tron(2019〜2020、MIB3移行前)、トゥアレグ(2019年〜)。
お手続きの流れ
- ご注文後、車両の年式・仕向地(またはVIN)をお送りください。
- 無料で適合診断を行い、必要な施工内容をご案内します。
- 遠隔で接続し、ソフトウェア上でワイヤレスCarPlayを有効化します。
- スマホをポケットに入れたまま、エンジン始動でワイヤレス接続を確認。
よくあるご質問
Q. CarPlayはあるのに、なぜ有線でしか使えないの? A. 一部の仕向地仕様では5GHz Wi-Fiが地域設定で無効化されているためです。ハードウェアは対応しています。
Q. ドングルは必要? A. 不要です。純正機能を有効化するため、後付け機器より安定し、純正UIのまま使えます。
Q. 輸入車でも対応できる? A. はい。むしろ並行輸入車で多い症状です。車両ごとに最適な方法をご案内します。
関連記事
日本仕様のポルシェ・アウディでワイヤレスCarPlayが使えない理由と有効化方法
Are you a workshop? We do this coding remotely for independent Porsche specialists while the car is on your ramp — you keep the customer and the labour, no PIWIS licence required. How trade accounts work.
Frequently bought together Customers who activate full-screen CarPlay most often add these two.
How It Works & Installation Guide
📄 Installation Guide — full step-by-step (open on phone or computer):
https://carsoft.co.nz/dl/guide/activation.html
It's the same guide we email you after purchase.
How it works
Delivered online straight to your car — no parts shipped, no dealer visit. Activated remotely over the internet after a quick one-time setup.1. One-time setup (~3–5 min)
We email a small setup file + a redeem code. Copy the file to the root of an SD/USB stick (FAT32), start the car and insert it — a Software Update screen runs automatically and installs a small helper; remove the card at Update successful. No menus or coding on your side.2. Redeem your code
Open our activation page, enter your redeem code and your car's VIN, press Activate (one car per code).3. Drive with internet
Mobile data or a hotspot — the car checks in, downloads and installs by itself, restarts once. Done.Good to know
Locked to your VIN, fully reversible, no firmware reflash. After this one-time setup, any future feature you buy needs only the redeem step.What you'll need
Redeem code, 17-character VIN, an SD/USB (FAT32), and internet in the car. Questions: info@innovativesoft.co.nz

